Shop Cat 5e patch panels for structured cabling, network racks, telecommunications rooms and wall-mounted network installations. Wallco offers Category 5e RJ45 panels in multiple port counts, termination styles and rack- or wall-mount configurations.
Compare panels by port count, 110 or feed-through termination, rack or wall mounting, shielding and wiring configuration.
Category 5e patch panels provide organized termination points for horizontal network cabling in telecommunications rooms, network racks and wall-mounted installations. They allow permanent cable runs to terminate at a central panel while equipment connections are made with removable patch cords.
Many Cat 5e panels use insulation-displacement contacts on the rear of the panel for terminating twisted-pair cable. Match conductor size and cable construction to the panel and follow the designated T568A or T568B wiring configuration.
Feed-through panels use modular connections on both sides, while blank keystone panels accept compatible modular jacks. These designs can simplify moves and changes because the rear connection may remain detachable rather than permanently punched down.
Rack-mount Cat 5e panels fit compatible network racks and cabinets, while wall-mount and vertical panels support installations where a full equipment rack is unnecessary. Verify rack width, rack-unit height and mounting hardware before installation.
Cat 5e panels may be available in unshielded or shielded configurations. Shielded panels should be matched with compatible shielded cable, jacks and grounding practices when the cabling system is designed for interference control.
Start with the required port count and mounting style, then compare termination method, shielding and wiring configuration. Confirm that the panel is compatible with the Cat 5e bulk cable and patch cords used throughout the installed network channel.
