SolaHD SOLATRON Plus Series Three Phase Power Conditioners products are designed for power-quality applications where sensitive loads need voltage regulation, electrical noise attenuation and isolation from disturbances on the incoming AC line.
SolaHD power conditioning is commonly applied to industrial controls, instrumentation, test equipment, automation systems and other electronics that can be disrupted by sags, swells, transients and conducted noise.
Selection should verify input voltage, regulated output voltage, VA/kVA capacity, phase, hardwired or portable construction, load characteristics and the level of voltage regulation or noise attenuation required by the equipment.
MCR and CVS families use ferroresonant transformer technology to provide regulation and isolation, while three-phase conditioner families address larger facility or process loads. Capacity should include expected steady-state load plus appropriate margin for inrush or future expansion.
Confirm whether the application is single-phase or three-phase, whether neutral is required, and whether the connected load can tolerate the waveform characteristics of a ferroresonant conditioner. Installation ventilation, ambient temperature and available fault current also matter.
For replacement work, match the full electrical configuration and installation style rather than relying only on VA rating.
It is used to improve the quality of AC power delivered to sensitive equipment by providing voltage regulation, isolation and attenuation of electrical noise and disturbances.
Start with the load VA or kVA, then verify input/output voltage, phase, load type and any inrush or growth margin before selecting the model.
