This Moujen category focuses on Moujen compact limit switches are designed for tight machine spaces and harsh environments; the manufacturer describes compact families as sealed, commonly prewired or connectorized and suitable where contaminants could interfere with an open switch.
This branch sits within Moujen Industrial Switches & Limit Switches > Limit Switches > Compact. Select by IP rating, cable or M8/M12 connection, actuator type, contact arrangement, body dimensions and mounting orientation.
In machine-control service, actuator geometry and travel are as important as the contact rating. The target should operate the switch positively without using the switch body or actuator as a mechanical stop.
Use the full Moujen series and actuator code when replacing an existing compact device. Housings that look similar may differ in contact action, cable entry, sealing or operating characteristics.
For a new application, document the normal target position, direction of motion, expected travel, switching load and exposure to dust, water, oil or washdown before choosing the switch.
Where compact is used in a guard or safety-related circuit, the complete machine-safety architecture and applicable standards must be considered; selecting a switch with a safety feature does not by itself make the machine safety function complete.
Verify IP rating, cable or M8/M12 connection, actuator type, contact arrangement, body dimensions and mounting orientation.
No. Also match the switch series, contact form, electrical rating, mounting pattern, cable or conduit arrangement and environmental/safety requirements.
