Signamax 065-1896SFPTB Industrial Media Converter
Model: 065-1896SFPTB
Signamax Order Part: FO-065-1896SFPTB
Copper Port: 1 x 10/100/1000Base-T/TX RJ45
Fiber Port: 1 x 1000Base SFP slot
DC Input: 12–48 VDC redundant terminal-block inputs
Operating Temperature: -40°C to 75°C
Product Overview
The Signamax 065-1896SFPTB is a rugged industrial Ethernet media converter for extending copper 10/100/1000 Mbps networks over Gigabit fiber. Its SFP receptacle accepts compatible 1000Base optical modules, allowing the fiber type and reach to be selected for the application while the hardened metal enclosure, redundant DC inputs and relay alarm contacts support demanding industrial installations.
Key Specifications & Features
- 10/100/1000Base-T/TX auto-negotiating RJ45 port with Auto-MDI/MDIX
- 1000Base SFP slot compliant with the SFP Multi-Source Agreement
- DIP-switch controls for link fault signaling, link-down alarm and fiber auto/force mode
- Relay output alarms for power failure and port link failure
- Redundant 12–48 VDC terminal-block power inputs
- IP30 metal housing with pre-attached DIN-rail mounting; panel mounting also supported
- -40°C to 75°C operating range
- NEMA TS1/TS2 environmental compliance and UL 508 listing
- Limited lifetime warranty
Typical Applications
- Traffic-control and roadside networks
- Factory-floor and industrial Ethernet
- Outdoor cabinets and harsh-temperature environments
- Copper-to-fiber Gigabit network extensions
Selection Guidance
Select a compatible 1000Base SFP module separately based on required fiber type, connector, wavelength and distance. The converter itself provides the SFP slot and does not determine the optical reach.
Refer to the Signamax technical documentation below for complete specifications, installation requirements and current manufacturer information.
Signamax 065-1896SFPTB Specification Sheet