Shop analog audio and video distribution amplifiers for sending one source to multiple displays, monitors, amplifiers or other AV devices. Wallco offers composite video, component video, stereo audio and combination audio/video distribution equipment for commercial and legacy AV installations.
Compare products by signal format, input and output count, connector type, bandwidth and required amplification or distribution configuration.
Distribution amplifiers take an incoming audio or video signal and provide multiple driven outputs for displays, monitors, amplifiers or other equipment. Active distribution helps maintain signal quality where a simple passive split may not be appropriate.
Composite video distribution amplifiers are used with baseband video carried over RCA or BNC connections. Select the number of outputs and connector style required by the source and destination equipment.
Component video systems use multiple signal paths for video transmission. Distribution equipment designed for component formats should provide the required number of channels and sufficient bandwidth for the intended source.
Audio distribution amplifiers can route a stereo source to several downstream devices. Verify signal level, connector configuration and whether the application requires audio-only or combined audio/video distribution.
Powered distribution amplifiers actively buffer or amplify outputs, while passive splitters divide a signal without active circuitry. Use the device type appropriate for the signal format, cable length and number of destinations.
Identify the source format first, then determine the required number of outputs and connectors. Compare supported bandwidth, audio channel configuration and installation power requirements.
