 |
 |
 |
 |
SCP 30 Watt; Single, Dual & Triple Series Power Supplies
These switchers are compact, rugged power supplies designed to power many of your industrial control and instrumentation devices and equipment, with high reliability and tight regulation through the most difficult factory-floor conditions around the world.
"User friendly" applies to these unique power supplies that feature easy-to-install DIN Rail and chassis mounting. Terminations are also easy to access (AC and DC terminations are well separated) and simple to wire. Safety is another aspect where the SCP distinguishes itself. The encapsulated design meets IP20 specifications, and the wide range of voltages will reliably support almost any low-power device in your cabinet or system for years to come. |
- International approvals for global use
- DIN Rail or Chassis Mount
- Rugged, encapsulated design to resist environment
- IP20 protection
- Many output voltages, 3.3-48 Volts; single, dual, triple
- 5-year warranty
Packaging and Mounting Specifications |
|
- Simple snap-on for DIN Rail TS35/7.5 or TS35/15
- M3 screw clamp terminations
- Chassis mounting possible on -DN Low-Profile versions by removing DIN clips (simply unscrew at the back of the unit)
- SCP-MDC - Pair of metal DIN clips
- SCP-PDC - 1 plastic DIN clip with lever for removal from rail
- UL1950, E137632
- EN60950
-
CE and IP20
Low Profile Catalog Number |
Description |
Output Voltages |
Min Load V1 A |
Efficiency |
V1 |
V2 |
V3 |
VDC |
A |
VDC |
A |
VDC |
A |
30 Watts; Switching DC Power Supply |
SCP30S3.3-DN |
3.3 V |
3.3 |
6.0 |
- |
- |
- |
- |
0 |
³62 |
SCP30S5-DN |
5 V |
5 |
6.0 |
- |
- |
- |
- |
0 |
³70 |
SCP30S12-DN |
12 V |
12 |
2.5 |
- |
- |
- |
- |
0 |
³75 |
SCP30S15-DN |
15 V |
15 |
2.0 |
- |
- |
- |
- |
0 |
³75 |
SCP30S24-DN |
24 V |
24 |
1.3 |
- |
- |
- |
- |
0 |
³77 |
SCP30S48-DN |
48 V |
48 |
0.6 |
- |
- |
- |
- |
0 |
³77 |
SCP30D12-DN |
Dual O/P ± 12V |
12 |
1.2 |
-12 |
1.2 |
- |
- |
0.12 |
³68 |
SCP30D15-DN |
Dual O/P ± 15 V |
15 |
1.0 |
-15 |
1.0 |
- |
- |
0.15 |
³68 |
SCP30D512-DN |
Dual O/P 5 V & 12 V |
5 |
3.0 |
12 |
1.2 |
- |
- |
0.3 |
³68 |
SCP30D524-DN |
Dual O/P 5 V & 24 V |
5 |
3.0 |
24 |
0.6 |
- |
- |
0.3 |
³68 |
SCP30T512-DN |
Triple O/P 5/12/12 V |
5 |
3.0 |
-12 |
0.6 |
12 |
0.6 |
0.3 |
³68 |
SCP30T515-DN |
Triple O/P 5/15/15 V |
5 |
3.0 |
-15 |
0.5 |
15 |
0.5 |
0.3 |
³68 |
The SCP series is available in the following model number suffixes:
- -DN: Low Profile – DIN Rail or Chassis Mount (ie: SCP30S3.3-DN)
- B-DN: Slim Line – DIN Rail Mount Availability Only (ie: SCP30S3.3B-DN)
Note: Slim Line version not available on SCP30D512-DN.
Please use the appropriate suffix when ordering.
|
Parameter |
Condition |
Value |
Input |
Vin: AC Input Voltage |
x
1 |
85...264 VAC |
Vin: DC Input Voltage |
100...375 VDC |
fin: Input Frequency |
50/60 Hz |
Filtering EMI/RFI |
EN 55011/B, 55022/B |
fSW: Switching Frequency |
Typ. 100 kHz |
Input Fusing Required |
Use 2.0 A Slow Fuse |
Output |
DVout: Output Voltage Accuracy |
Vin = 230V, Iout= max, 25°C |
V1£±1%, V2/3 £±3% |
DVNF: Ripple |
Vin = min, Iout= max, 25°C |
£1%, VOUT |
DVHF: Noise |
Vin = min, Iout= max, 25°C |
£2%, VOUT |
Line Regulation |
Vin = min,/max, 25°C Iout = max, 25°C |
£±0.5%, VOUT |
Load Regulation |
Iout = 10...90...10%, 25°C Vin = 230 VAC, 25°C |
£±0.5%, VOUT |
IMAX: Overcurrent Protection |
1 |
105...130%Inom |
tR: Load Regulation Timing |
10...90...10%, 25°C |
<4 ms |
Temperature Coefficient |
TA = -25...+65°C |
0.01%/K |
Overload/Short Circuit |
Continuous |
Derating Single/Dual/Triple |
TA > 50°C |
2/3/5%/K max |
General |
th: Holdup Time |
Vin = 230 VAC |
>50 ms |
TA: Operating Temperature |
x |
-25...+65°C |
TS: Storage Temperature |
TA = 25°C |
-45...+85°C |
Case Temperature Rise at Full Load |
1 |
45 K max |
MTBF at 25oC (input/output) |
acc. MIL-HDBK-217F |
800,000 hrs |
Transient Protection |
1 |
EN61000-4-2, 3, 4, 5 |
Cooling |
1 |
Convection |
Weight |
1 |
340g/380g |
Case Material/Potting |
1 |
UL94-VO |
Product Level |
1 |
Level 3 |
Protection |
1 |
IP20 |
Visual Indicators |
1 |
Green LED indicates DC OK for B-DN Slim Line versions only. |
|
|
 |
 |
 |
 |

|