CMOS Digital Circuitry - 0.5% Repeatable Accuracy
Electrical Specifications
Contact
Rating: 10 Amps 240VAC or less, 1/3 HP, 240VAC or 120VAC,
Pilot Duty 345VA, 120VAC or 240VAC, 50/60Hz
Life: 500,000 operations at full load
Mechanical Life: 7,000,000 operations at no load
Input
Nominal Input Voltages: See Chart
Steady State Input Current: See Chart
Timing
Timing Adjustment Modes Available: See Timing Range Chart
Repeat Accuracy
±0.5% - after established at steady temperature (4 hours)
Timing Tolerance at High End of Range: -0, +10%
Timing Tolerance at Low End of Range: +0, -50%
Reset Time: 60mS Typ
Protection
Transient: Surge Test 10,000V for 20mS
Dielectric Breakdown:
Coil To Contact: 1850 VAC
Across Open Contact: 1850 VAC
Environmental Characteristics
Operating: -20°C to +55°C
Weight
Std: 4.5 ozs. (130 grams) - approx
RECYCLE TIMING - The first delay period begins when the input voltage is applied. At the end of the first delay, or "OFF" period, the internal relay pulls in, and the second delay, or "ON" period begins. When the second delay period ends, the relay drops out. This recycling sequence will continue until the removal of input voltage. When input voltage is removed, the relay drops out.
