Shop SC fiber patch cords for fiber patch panels, media converters, network equipment and optical communications systems. Wallco offers SC-to-SC and mixed-connector fiber cables in single-mode and multimode configurations and multiple lengths.
Compare patch cords by connector type at each end, fiber mode, simplex or duplex construction and required cable length.
SC connectors are widely used on fiber patch panels, network equipment, media converters and telecommunications hardware. Finished SC patch cords can provide the same connector at both ends or transition to another compatible fiber connector format.
SC-to-SC assemblies connect compatible SC interfaces directly and are available for both single-mode and multimode fiber systems. Verify fiber type and equipment requirements before selecting a replacement or new patch cord.
Hybrid patch cords provide an SC connector at one end and a different connector such as ST or LC at the other. These cables can bridge equipment generations and connection formats without using a separate fiber adapter.
SC patch cords may carry either single-mode or multimode fiber. Matching the connector shape alone is not sufficient; the optical fiber specification must also correspond with the transceivers and installed fiber system.
Simplex assemblies use one fiber path, while duplex cables provide two connections commonly used for bidirectional equipment links. Verify both the required fiber count and the connector arrangement at the equipment.
Identify the connector required at both ends, then confirm fiber mode, simplex or duplex construction and cable length. When replacing an existing cord, match its optical fiber specification as well as its connector configuration.
