The Pan Pacific BNC Series category covers RF and coaxial connectivity within the manufacturer's coaxial RF connectors and adapters catalog. Examples currently represented in Wallco's Pan Pacific catalog include BNC-3011 (BNC-3011 For Rg-59/U,62/U, Standard Solder Plug) and BNC-3011-75 (BNC-3011-75 For Rg-59/U 62/U Solder Plug 75 Ohm).
For this Pan Pacific category, verify connector series, 50- or 75-ohm impedance as applicable, mating gender, target coax cable group, termination method and panel/cable mounting. Those attributes determine mating compatibility and whether the part is appropriate for the intended equipment or cabling system.
The catalog path is Pan Pacific > RF Connectors & Adaptors > BNC Series. Keeping the manufacturer family, parent interface and exact subcategory together is useful for distinguishing parts that share a similar appearance but use different termination, wiring, impedance, contact or mounting details.
Start with the existing Pan Pacific part number when replacing a component. If it is unavailable, document the mating equipment and the key attributes for bnc series: connector series, 50- or 75-ohm impedance as applicable, mating gender, target coax cable group, termination method and panel/cable mounting.
Wallco currently has 206 active Pan Pacific products assigned to this category in the latest catalog export. The category is intended to narrow the choice; final compatibility should be confirmed at the individual part level.
Do not assume that two products in the bnc series family are interchangeable solely because they share a connector family. Pinout, impedance, shielding, termination, shell size, wiring standard or signal direction may differ depending on the interface.
Compare connector series, 50- or 75-ohm impedance as applicable, mating gender, target coax cable group, termination method and panel/cable mounting.
Match the complete Pan Pacific part number first. If cross-referencing, compare the mating interface, mechanical format, termination/wiring and electrical or signal requirements before substituting another model.
