Moujen MN-5312-P MN-5 Series high utility cross roller plunger limit switch
| Product Type: | High Utility Limit Switch |
| Configuration: | Cross Roller Plunger | SPDT | Screw Terminals |
| Rating: | 10A @ 250VAC | 0.5A @ 125VDC |
| Protection: | IP65 |
| Moujen Part #: | MN-5312-P |
The Moujen MN-5312-P is an MN Series high utility limit switch with a cross roller plunger actuator, SPDT contacts and screw terminals. Its IP65 enclosure and actuator seal boot support industrial position and presence sensing applications where dust and water resistance are required. The MN-5312-P model designation identifies this specific MN-5 Series configuration.
| Manufacturer Part # | MN-5312-P |
| Series | MN |
| Product Type | High Utility Limit Switch |
| Actuator | Cross Roller Plunger |
| Contact Configuration | SPDT |
| Terminal Type | Screw |
| AC Rating | 10A at 250VAC |
| DC Rating | 0.5A at 125VDC |
| Protection Rating | IP65 |
| Operating Temperature | -10°C to 80°C |
The MN-5312-P uses a cross roller plunger actuator for mechanical position detection. The SPDT switching arrangement provides normally open and normally closed circuit options for industrial control and signaling applications.
Key Product InformationMN-5312-P uses a cross roller plunger actuator. Verify actuator style, electrical load, mounting requirements, terminal arrangement and environmental requirements before ordering. Other MN Series configurations are available with different actuator arrangements.