AtlasIED single-channel power amplifiers support simple one-zone systems and localized amplification. The range includes compact PA/TSD models with 4/8-ohm and/or 25V/70.7V/100V outputs depending on model.
Choose output power from the total connected speaker load plus headroom, then verify line-voltage/impedance compatibility and available input/control features. A 70V speaker system should be sized from the sum of transformer taps, not the nominal number of speakers.
Single-channel amplifiers are appropriate when one program feed serves one speaker zone without independent zone control.
Choose output power from the total connected speaker load plus headroom, then verify line-voltage/impedance compatibility and available input/control features. A 70V speaker system should be sized from the sum of transformer taps, not the nominal number of speakers. Representative Wallco listings include WAL07-PA1001G, WAL07-PA40G, WAL07-PA601.
Single-channel amplifiers are appropriate when one program feed serves one speaker zone without independent zone control.
Confirm connected speaker load, channel count, output topology, required headroom, input/routing needs and any DSP, network or Dante requirements.
Yes. Provide the existing AtlasIED part number when replacing equipment, or send the system voltage/impedance, application, mounting location and project requirements for new designs.
