AtlasIED DPA Series amplifiers combine multi-channel power, onboard DSP and network control. DPA models can be configured for two-channel 70V/100V operation, four-channel 4/8-ohm operation or split high-/low-impedance configurations, and selected models accept Dante or analog expansion cards.
Select by required system power and the exact channel configuration. Because available channel count and power allocation change with operating mode, the connected 70V/100V and low-impedance loads should be calculated before choosing the chassis.
DPA is well suited to mixed commercial systems that need flexible output topology, remote setup and integrated signal processing.
Select by required system power and the exact channel configuration. Because available channel count and power allocation change with operating mode, the connected 70V/100V and low-impedance loads should be calculated before choosing the chassis. Representative Wallco listings include WAL07-DPA-102PM, WAL07-DPA-AMIX, WAL07-DPA-DAC4.
DPA is well suited to mixed commercial systems that need flexible output topology, remote setup and integrated signal processing.
Confirm connected speaker load, channel count, output topology, required headroom, input/routing needs and any DSP, network or Dante requirements.
Yes. Provide the existing AtlasIED part number when replacing equipment, or send the system voltage/impedance, application, mounting location and project requirements for new designs.
