ACI 104217 8542A240 TIMER MULTI,24-240V,0-10M,SPDT

85 Series Multi Function / Range / Voltage Timers

• Multi Function: Each timer can function as "On Delay", "Repeat Cycle", "Off Delay" or "Reverse Repeat Cycle" timer
• Multi Range: Each timer offers a choice of (4) timing ranges: 0.05 / 1 Sec. : 0.12 / 10 Sec.: 0.6 Sec. / 1 Min.: 6 Sec. / 10 Min. or 0.05 / 1 Min.N: 0.12 / 10 Min.: 0.6 Min. / 1 Hour: 1 Min. / 10 Hour
• Multi Input Voltage: Each timer offers input voltages from 24 VAC / VDC through 240 VAC / VDC, 50 / 60 Hz without changing wiring or dip switches
• 
  

  OUTPUT	TIMING RANGE	SWITCH "T" (TIME RANGE) SETTING				MODEL NUMBER	CATALOG NUMBER	WT Lbs (each)
  		00	10	01	11
  11 PIN DPDT	SEC(s) - MIN (m)	0.05(s) - 1(s)	0.12(s) - 10(s)	0.6(s) - 1(m)	6(s) - 10(m)	8511A240	104214	0.3
  	MIN (m) - HOUR (h)	0.05(m) - 1(m)	0.12(m) - 10(m)	0.6(m) - 1(h)	1(m) - 10(h)	8521A240	104216	0.3
  8 PIN SPDT	SEC (s) - MIN (m)	0.05(s) - 1(s)	0.12(s) - 10(s)	0.6(s) - 1(m)	6(s) - 10(m)	8542A240	104217	0.3
  	MIN (m) - HOUR (h)	0.05(m) - 1(m)	0.12(m) - 10(m)	0.6(m) - 1(h)	1(m) - 10(h)	8552A240	104218	0.3
  PANEL MOUNT ADAPTOR for snap mounting into a panel cutout.							115880	0.1

  
  Function Chart

  FUNCTION	SWITCH "F" SETTING	DESCRIPTION
  ON DELAY	0 0	On Delay: Timing begins when power is applied. The output contacts transfer when the "On Delay" time delay setting is reached. To reset the timer, remove the input power or operate the customer supplied external "reset" switch.
  REPEAT CYCLE	1 0	Repeat Cycle: Timing begins when power is applied. The output contacts transfer when the time delay setting is reached. The output contacts remain transferred until the time delay setting is again reached. The output contacts are then released and return to the original state. The timer automatically resets and repeats the timing cycle until the input power is removed.
  OFF DELAY	0 1	Off Delay: Timing requires a customer supplied normally closed external switch connected to the "reset" terminals. Applying power immediately transfers the output contacts. Timing begins when the "reset" switch is opened. When the time delay setting is reached, the output contacts are released. Reset the timer by operating the customer supplied external "reset" switch.
  INTERVAL(REVERSE ON DELAY)	0 1	Interval: Applying power immediately transfers the output contacts and timing begins. Once the time delay setting is reached, the output contacts are released. Reset the timer either by removing the input power or operating the customer supplied external "reset" switch.

  
  Not for direct motor starting