Speco Technologies' PAP160A is a high-powered, portable, self-amplified sound
system
and is the ideal solution for classrooms, training rooms, auditoriums,
houses of worship, traveling presenters and much more. The unit contains
a 12" woofer and 1.4" tweeter with a built-in 380W amplifier, iPodŽDock
and USB MP3 player.
1) USB Connector & power: Connect Flash
drive with MP3 files for play via built-in MP3 player. MP3/iPodŽ input
can also be turned on/off.
2) MP3/iPodŽ level: Controls the volume level of the MP3 or iPodŽ.
3) MIC Input: Connect a dynamic microphone through either 3-pin XLR connector or 1/4" jack
4) MIC level: Control volume of microphone connected via MIC input (#3).
5)
Line Input: Connect device with line level output such as CD player,
tuner or mixer through either RCA balanced input or 3-pin XLR.
6) Line Input Level: Control volume level of the Line input
7) Output: Send output signal to another amplifier or to another PAP160A.
8) Bass & Treble: Control the low & high level frequency tone levels. The range is selectable between -12dB to +12dB.
9) iPodŽ Dock:Dock will play output from an iPodŽ, iPhoneŽ or iTouchŽ but will not charge those units.
10)
MP3 Player & Controls: Display information for any MP3 files
connected via the USB input. There are 5 control buttons (from left to
right):
a. Play/Pause b. Stop c. Play options: Random (default): Play
the songs on the drive in a random order once through, Repeat One:
Repeat the current song & Repeat All: Continue to randomly play all
songs. d. Reverse: One quick press & release will go to the previous
song. Holding the button down will rewind through the current song.
e.
Forward: One quick press & release will go to the next song.
Holding the button down will forward through the current song.
