The Signamax 065-1480 18-Bay Managed Media Converter Rack Mount Chassis provides full SNMP management capabilities for mission-critical installations. The 065-1480 provides 18 bays of space for all 065-14xx series Signamax managed media converters in a standard 2U high enclosure. It also includes the 065-1481 Management Module, which communicates with the Signamax 065-14xx series media converters on the chassis’ backplane. It provides full status information on the individual media converter’s ports and allows the advanced management capabilities of the 065-14xx series managed media converters to be switched on or off remotely and individually.  Diagnostic testing from a centralized location avoids unnecessary technician dispatch. Alarm traps can be sent to up to five remote IP addresses simultaneously, allowing integration within a variety of Network Management Systems. In-band and out-of-band management are supported by local and remote Telnet console Command Line Interface (CLI), a web browser-based Graphical User Interface (GUI), and a menu-driven interface.

Two fully redundant, load-sharing power supplies are standard, to ensure continued availability of the media converters in the event of a power supply failure. Either power supply is hot-swappable and can be taken offline and removed from the unit while the media converters are operating; the media converters themselves are also hot-swappable. The 065-1480 also ships standard with three fully redundant, load-sharing cooling fans to ensure reliable operation.

KEY FEATURES

065-1480 Chassis

·    CAPACITY

Eighteen bays for up to eighteen 065-14xx Media Converters

·    CONSTRUCTION

SECC zinc-coated steel

·    COOLING

One 42.5 cfm rear-mounted fan, plus one fan for each of the two redundant power supplies.

·    LED STATUS INDICATORS

Power (2x): Power supply on-line

FAN (3x): Fan status

·    DIMENSIONS

17.3"W x 10.9"D x 3.5"H (440 mm x 276 mm x 90 mm); 2 standard rack units

·    WEIGHT

Approximately 29.7 pounds (13.5 kilograms), fully loaded

·    POWER SUPPLIES - LOAD SHARING AND HOT-SWAPPABLE

 (Each; 2 supplied as standard equipment)

Input:

Model 065-1480: 90-240 Volts AC, 47-63 Hz.

Model 065-1480DC: -48 Volts DC

Output:

Normal: +12 Volts DC (Min. +11.88 Volts, Max. +12.12 Volts, 7.0 Amps)

Total Regulation: +/- 1.0%, Rip. 120 mV, Load 1.0%, Line 0.5%

Overload Protection: All outputs protected against short circuit conditions; automatic recovery

Over-Voltage Protection: Output level exceeding 13.2 Volts causes’ shutdown - automatic recovery

Temperature:

Operating: 32° - 104°F (0° - 40° C)

Storage: -13°F to 158°F (-25°C to 70°C)

EMI: FCC Part 15 Class A, CE Class A

Safety: UL 1950 Listed

·    WARRANTY

Lifetime, including power supplies

065-1481 Management Module

·    PROTOCOLS SUPPORTED

TCP, UDP, ICMP, IP, ARP

·    SERVICE

HTTP, Telnet, SNMP, TFTP

·    PORTS

DB-9 Serial Data (x1), RJ-45 10/100BaseT/TX (x1)

·    STATUS LEDS

Power, System, Alert, 10/100 speed, Link/ACT

·    MIB SUPPORTED

MIB II, RMON

·    TEMPERATURE

Storage: -40°F - 176°F (-40°C - 80°C)

Operating: 32°F - 122°F (0°C - 50°C)

·    MAXIMUM ALTITUDE

10,000 ft.

·    DIMENSIONS

6.75"L x 2.72"W x 0.85"H (171.5mm x 69mm x 21.5mm)

·    WEIGHT

0.33 pounds (115 grams)

·    COMPLIANCE

FCC Part 15 Class A, CE Class A

·    WARRANTY

Lifetime