 |
 |
 |
|
|
Intelligent 4-CH Analog Output Ethernet I/O Server
- Ethernet Block I/O with 4 Channel Analog Output
- 12 bit resolution and high accurary
- Indepent output operation with 0-10V, ±10V, 0-20mA
- Programable output slew rate
- Support OPC Server Driver
- Windows Utiltity, OPC Server Utility, Modbus/TCP
protocol, SNMP and Web management
- Built-in watchdog timer and real-time clock
- Din-Rail Mount with Robust Aluminum case and IP31
protection
|
| System |
|
|
|
16 bits/100MHZ, RISC-Based | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PWR: Power Input plugged and On (Green) |
| RDY: System startup ready (Red) | |
| Network Interface |
|
|
|
IEEE 802 .3 10Base-T |
| IEEE 802 .3u 100Base-TX | |
|
|
|
|
|
|
Built-in 1.5 KV magnetic isolation protection | |
|
|
|
Upper (LAN Activity): Orange On & Blinking |
| Lower(10M/100M): 10M (Green Off) /100M(Green ON) | |
|
|
|
IP, TCP, UDP, SNMP, HTTP, Telnet, BOOTP, DHCP, Modbus/TCP, OPC Server | |
| Analog Output |
|
|
|
|
|
|
|
|
|
Voltage: 0-10V, ±10V
Current: ±20mA | |
|
|
|
|
|
|
|
|
|
| Programmable Output Slope to Satefy Value | |
|
0.125 to 128 mA/sec (Current) |
|
0.0625 to 64 V/sec (Voltage) | |
|
|
|
|
|
|
| Power Requirements |
|
|
|
external unregulated +24V
| |
|
|
|
| Mechanical |
|
|
|
120 (H) x 55 (W) x 75 (D)
| |
|
|
|
|
|
|
| Environmental |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Feature |
|
|
|
Windows Utility, Web browser, SNMP, DHCP Client, TFTP Server for firmware update | |
|
|
|
Block I/O Utility, Device Fider Utility | |
|
|
|
OPC Server for Modbus/TCP | |
|
|
|
MIB-II: System, SNMP Trap and Private MIB | |
|
|
|
|
|
| Conditions(IF) of the DI/Counter values, |
|
Actions(Then) include DO/Pulse, Counter Reset and SNMP | |
|
|
|
C++ Example code by optional | |
|
|
|
 |
|
 |
|
|
|
