| Technology |
|
|
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX/100BASE-FX
IEEE802.3x Flow Control and Back pressure | |
|
|
|
Store and Forward switching architecture | |
|
|
Tx to Fiber-If Tx port link breaks down, JetCon 2301 will force the fiber port to disconnect.
Fiber to Tx-If fiber port link breaks down, JetCon 2301 will force the Tx port to disconnect. | |
| Interface |
|
|
|
1 x 10/100 Base-TX with Auto MDI/MDI-X and Auto Negotiation functions
1 x 100 Base-FX, supports Full/Half duplex and set by DIP Switch
| |
|
|
|
10/100 Base-TX: RJ-45
100 Base-FX: Duplex SC | |
|
|
|
Embedded in 6-pin terminal block connector
| |
|
|
|
Embedded in 6-pin terminal block connector | |
|
|
|
RJ-45 connector: supports CAT-3, CAT-4, CAT-5 unshielded twisted pair or shielded twisted pair cable. The link distance is maximum 100 meters.
SC connector: supports multi-mode or single-mode optical fiber
Multi-mode fiber: 50/125um or 62.5/125um, max. distance 2KM
Single-mode fiber: 8/125um, 9/125um or 10/125 um, max. distance 30KM | |
|
|
|
JetCon2301-m, Multi-mode: 2KM max. distance
Wave-length: 1310nm
Min Tx Power:-19dBm
Max Tx Power:-14dBm
Min. Rx Sensitivity:-14dBm
Max Rx Sensitivity:-31
Link budget:12dBm
JetCon2301-s, Single-mode: 30KM max. distance
Wave-length:1310nm
Max Tx Power:-8dBm
Min Tx Power:-15dBm
Max Rx Sensitivity:-34dBm
Min Rx Sensitivity: -8dBm | |
| Power Requirements |
|
|
|
| Reverse Polarity Protection | |
|
|
|
|
| Mechanical |
|
|
| 1.2KV testing passed for port to port and port to power | |
|
|
|
|
|
| IP31 protection, aluminum case | |
|
|
|
54 mm (W) x 135 mm (H) x 105mm (D) | |
| Environmental |
|
|
|
-10 to 70°C (14 to 158°F) | |
|
|
|
5% to 95% (Non-condensing) | |
|
|
|
-40 to 85°C (-40 to 185°F) | |
| Regulatory Approvals |
|
|
|
FCC Class A, EN55022 Class A | |
|
|
|
EN61000-4-2, EN61000-4-3, EN61000-4-4 , EN61000-4-5, EN61000-4-6, EN61000-4-8, EN610004-11 | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
225,855 Hours, MIL-HDBK-217F standard
| |
|
|
|
